The steel wheel of the flint steel-wheel lighter is made of special steel with teeth on the periphery; the flint is made of low-temperature alloy, the ignition point is about 160℃, and the heat is large. The flint was pressed against the surface of the steel wheel by the tension spring, and it was heated by the friction of the steel wheel during operation, causing a fire. This kind of lighter is not as easy to operate as other lighters, but it generates more sparks and has a higher ignition rate.
Piezoelectric ceramic lighters and pyrophoric tissues are equipped with piezoelectric ceramic elements. Piezoelectric ceramics, under the effect of mechanical stress, cause the internal positive and negative charge centers to shift relative to each other and cause polarization, which leads to the appearance of bound charges with opposite signs on both ends of the material. Therefore, when the piezoelectric ceramic element is subjected to impact pressure, the mechanical energy is converted into electric energy, and the instant high-voltage electric spark is emitted at the top level to ignite the fuel.
There is a magnetoelectric converter inside the magnetic induction lighter. During operation, the magnet and the coil move relative to each other, change the magnetic flux, and generate a discharge voltage, so that sparks are generated between the electrode air gaps and gas is ignited.
Lighter battery lighter is powered by integrated circuit battery or general battery. When the circuit of the capacitor and the transformer is turned on, a high-voltage electric spark is generated, igniting gas.
After the solar lighter is exposed to sunlight or other light, its photovoltaic cell converts the light energy into electrical energy, which is charged into the storage battery. When the battery is in use, the capacitor is charged, and the booster coil instantly generates a high resistance electromotive force, which emits electric sparks between the insulated diodes to ignite the gas.
Microcomputer lighter: A battery-powered microcomputer is installed in the lighter, and the microcomputer's integrated circuit has an active circulation system. When operating, the circuit can be turned on to ignite. Once the flame is extinguished by the wind, it can be burned from the beginning.
Gaseous lighter: its standard pressure is 24 degrees Celsius, exceeding 104kpa.
Post-mix lighters: This type of gaseous lighters are mixed with air and fuel for incineration after incineration.
Front-mix lighters: The fuel gas and air of this type of gaseous lighters are first mixed for effect and then burned.
Disposable lighters: This type of lighter is filled with fuel during manufacture and cannot be refilled.
Rechargeable lighters: This type of lighter can be recharged with an external gas tank or pierced into a new fuel tank.
Adjustable lighter: This type of lighter provides equipment that can freely adjust the flame height.
Actively adjustable pipe lighter: This type of lighter provides a device that can actively increase the flame height from upright to tilted. This device is specially designed for pipes.
Tricky lighters: This type of lighter is mainly for his entertainment. For example, the whole person lighter with electric function. After developing ideas, planners can plan many types of such lighters, which are usually used as gifts.
Related Suggestion : CIGARETTE LIGHT WHEEL LIGHTER OQ-701